|Nominal Capacity:||Nominal Voltage:|
|Internal Impedence:||Operating Votage:|
|Dimension:||Battery Weight:||About 24kg|
1.1200W wireless electric charging 60V 20A benefits of wireless charging
The PWS-1K2-DC-48N1 charger is a device that uses the resonant electromagnetic induction principle to achieve non-contact charging and powering of 48V DC electrical devices. The device can be used with lithium batteries, lead-acid batteries, capacitive loads, etc.
The charger input uses 220VAC±20%, 50/60Hz power supply, output power up to 1200W, output voltage 20-60VDC, nominal output voltage 48VDC, rated charging current 20A.
The transmitter chassis uses LEDs for status indication, providing a clear visual indication of the current charger operating status.
This charger consists of four major parts: transmitter chassis, transmitter coil, receiver chassis and receiver coil.
Note: The schematic diagram only shows the name of each part, the specific "4 installation dimensions and wiring port description" shall prevail.
1 Transmitter chassis
2 Transmitter chassis antenna head
3 Transmitter chassis power cable input
4 Transmitter coil
5 Transmitter chassis and transmitting coil connection cable
6 Transmitter chassis and transmitting coil connection line butt terminal
7 Receiver Coil
8 Receiver Chassis
9 Receiver chassis and receiving coil connection line
10 Receiver chassis and receiving coil connection line docking terminal
11 Receiver chassis antenna head
12 485 communication cable
13 Battery cable, red and black total 2pcs
Output voltage error
Maximum transmission efficiency
Vertical transmission distance
Horizontal degrees of freedom
Constant current, constant voltage, trickle current
Voltage stabilization accuracy
Current stabilization accuracy
Operating ambient temperature
Storage ambient temperature
Transmitter chassis weight
Transmitter coil weight
Receiver chassis weight
Receiver coil weight
Contact Person: Miss. Fiona