|Nominal Capacity:||Nominal Voltage:|
|Internal Impedence:||Operating Votage:|
1. Wireless ev car charger industrial wireless charging
This 200W charger is a device that adopts the principle of resonant electromagnetic induction and can provide non-contact charging and power supply for DC electrical equipment. The electrical equipment can be electrical devices using lithium, lead-acid batteries, capacitive loads, etc.
The charger uses 220VAC ± 20%, 50/60hz power supply as its input, with an output power of up to 200W, an output voltage of 0-70vdc and a maximum output current of 15A.
The charger can also input a 15v-70v DC power supply, with an output power of up to 200W, an output voltage of 0-70vdc and a maximum output current of 15A.
The transmitter control chassis uses a liquid crystal display, which can clearly and intuitively display the current charging voltage and charging current.
The PWS-200-DC-70 type charger consists of four parts: transmission control cabinet, transmission coil cabinet, receiving control cabinet and receiving coil cabinet.
The transmission control cabinet uses an all-aluminium shell, LCD, 1 input and 2 output harnesses, and the output harness is connected with the transmission coil cabinet through the docking terminal.
Display the immediate state of charger charging. Voltage and current are the current transmitter controller input voltage and current, and respectively, the interface is shown in Figure 1 below:
AC90V-240V 50/60Hz or 15V-70V
DC(Can be powered by batteries and solar panels）
Output voltage error
Vertical transmission distance
Maximum 100mm (with many kinds of lines Circle, different coils)
Horizontal dislocation offset
Maximum 80mm (with many kinds of coils, Different coil level dislocation is different)
Stable pressure accuracy
Stable flow accuracy
Operating ambient temperature
Storage environment temperature
Contact Person: Miss. Fiona